1.2m Wishbone Extractor Bottom Suspension Arm Lever Groove Joint Adjustable Hook

Specifically designed to pull and hold down the lower suspension arms to allow separation of the hub from the lower arms

Also assists in the separation of lower ball joint or suspension struts from the hub

Designed sliding groove for adjust the position to work easily.

Makes the job easier and safer with hands free operation

Suitable for most cars and light commercial vehicles

To push down the wishbone and other suspension parts, e.g. during the disassembly of the drive shaft, during replacing the gaiter or exchange of the wheel bearing. After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabilizer tension, in order to pull the joint from the support.

With this lever tool the work can comfortably and surely be accomplished by one person.

1.2m whole length, 33mm OD tube.