BMW Anti Theft Locking Wheel Nut Stud Remover Tool #41-#60 Individual
Please note, return not accepted!
The hardness and torque range values of the anti-theft screws we tested fall within normal parameters, and the nuts will not be damaged under these conditions.
When installing tire sockets or nuts/screws, passenger vehicles typically require a torque value of around 120-150 N·m to secure them properly, with a maximum of 160 N·m. However, our nuts are designed to meet a torque standard of 200 N·m, meaning they will not sustain damage when tightened within this range.
Potential reasons for customer-reported damage:
Rust on wheel screws: Corroded screws become difficult to remove, requiring excessive torque that may ultimately fail to dislodge the nut while damaging it.
Improper installation torque: If the anti-theft screws are not installed using the specified torque, excessive force may be required for removal. This could exceed the socket’s maximum torque tolerance, causing socket cracks. Recommendation: Always use a torque wrench and stay within the socket’s rated torque range.
Extended wrench leverage: While short-handled torque wrenches are sufficient for removal, switching to a long-handled wrench like breaking bar or long extension bar during the process reduces user effort but amplifies force at the tool head, potentially damaging the nut.
Special shape for Anti-Theft Lug NutSet of twenty locking keys for the removal of locking wheel nuts on BMW vehicles.
- The key can be drive either by a 1/2" dr. ratchet handle with socket adaper together or 21mm socket, spanner.
- Drive pattern material: Cr-Mo Steel
Finish: PH Black
Applications:
1 Series F20/F21, 3 Series F30/F31, 4 Series F32/F34/F36, 5 Series F10/F11, 6 Series F12/F13 and 7 Series F01/F02/F04
Individual options:
#45, 
#46,
#47,
#48,
#49,
#50,
#52, 
#53, 
#54,
#55,
#55,
#56,
#58,
#59,
#60
