Home > Power and Air Tools > Cutting Disc & Blades > EDN Germany Made Carbide Tipped Circular Saw blades for Timber Aluminium Non-ferrous Metal Cutting
1/1
Share:
Flash Sale
EDN Germany Made Carbide Tipped Circular Saw blades for Timber Aluminium Non-ferrous Metal Cutting
No.190730
SKU: 1703190730
(0)
AUD152.00
AUD160.00
-5%
Original from Germany. EDN brand.
EDN is located in the heart of Cronenberg and has manufactured Euronorm Standard quality saw blades for 45 years.
These Carbide Tipped Circular Saw blades for Aluminium Non-ferrous Metal have following characteristics:
Triple-chip-flat tooth saw blades
Negative tooth angle
Noise reduced through special laser slots or extension slots with blanks
For use in counterrunning against the direction of fee. For separating and mitre cuts in
window and door profiles in light alloy
solid materials in aluminium and similar alloys
plastic profiles and panel material e.g. Corian, Variocor, Resoplan, etc.
solid material as well as for profiles >5mm wall thickness
Size options:
300x3.2x35x96T
350x3.6x35x108T
400x3.6x35x120T
Attention:
It is essential to ensure faultness workpiece guidance and workpiece positioning at the correct angle to the working spindle; if possible the workpiece should be clamped.
The cutting speed should if possible not be less than 36m/sec. for aluminium profiles and not less than 30m/sec. for solid material.
Rules of thumb: The softer the material, the higher the speed! The harder the material, the lower the speed!
NE negative only use on crosscut-saws without automatic feed of the saw.
1/1
